ePower 2600W 12V True Sine Wave Inverter with AC Transfer & Safety Switch

Australian Support

Guaranteed

Best Deal

Convert your DC battery power to household AC power anywhere, anytime with the ePOWER EN1126X. This state of the art, easy to use inverter will offer you reliable service for providing AC power for your home, boat, 4WD, truck or Caravan.

The ePOWER 2600W Inverter with AC Transfer & Safety Switch is one in a family of affordable, high quality, professional level inverters by Enerdrive. By using the latest power conversion technology, ePOWER inverters deliver clean and energy efficient true sine wave AC power from your DC supply.

Features:

Seamless 16A AC Internal Transfer Switch
AC RCD/Safety Switch with test button
Removable LED Remote Control Display Panel
Regulated Pure Sine Wave Output
Silent Operation
Compact Size for Easy Installation
USB Port for charging USB devices

This ePOWER Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board.

Also included in the unit is a RCD Safety Switch. This switch monitors the flow of electricity through the inverter and detects any problems that may pose a risk to personal safety and switches the output power off within 0.03 of a second.

The ePOWER 2000W is built to operate basic equipment such as power tools, computers, microwave ovens, televisions and other appliances that use up to 2000W of power for operation. All Enerdrive ePOWER Inverters are covered by our extensive 2-Year warranty.

(ENE-EN1226S-X)

General

AC Output Power: 2600W
AC Output Current: 11.3A
AC Output Voltage: 230 Vac / 50 Hz
AC Output Waveform: Sinewave (<3% THD)
Nominal DC Input Voltage: 12.5 VDC
No Load battery draw: < 1.5 ADC
DC Input Voltage operating range: 10.5 – 15.5 VDC
Under Voltage Alarm: 11.0 / 12.1 VDC
Under Voltage Alarm Recovery: 11.3 / 12.3 VDC
Under Voltage Shutdown: 10.5 / 11.8 VDC
Under Voltage Shutdown Recovery: 12.0 / 12.6 VDC
Over Voltage Shutdown: 15.5 VDC
USB: Port 5V, 750 mA

AC Transfer Switch

Transfer Time: < 30 ms
Transfer Relay Rating: 16A (resistive load)
AC Input socket IEC-C20: 16A max
AC Output socket IEC-C19: 16A max
AC Output Front GPO: 10A max

Safety and Environmental

Conformance: All required Australian Standards , CE LVD: EN/IEC 62040-1, IEC61558-2-16
EMI / EMC CE EMC: EN/IEC 62040-2 category C1
Agency Markings: RCM , CE
Operating Temperature: 0°C to 40°C
Storage Temperature: -20°C to 60°C
Relative Humidity: 5-90% non-condensing
Operating Altitude: Up to 3000 meters above sea level

Warranty
2 Years

Estimate Run Time On Load

Following run times are estimates for reference, based on using different battery bank sizes. Actual run times may vary.

Important: Power Drain from DC Battery Bank.

Please note that there is a power drain of approx 700mA from the battery bank when the Inverter is running in AC By-Pass mode. In order to avoid draining down the battery bank, a battery charger with sufficient power is required to maintain the battery bank voltage.

Estimated run time on different 12V Battery Bank size

Note: Left/right table scroll on mobile

AC Load	60AH	120AH	180AH	240AH	300AH
50 W	11 hrs	22 hrs	33 hrs	44 hrs	55 hrs
100 W	5 hrs	11.5 hrs	17 hrs	23 hrs	29 hrs
200 W	2.5 hrs	5 hrs	8 hrs	11 hrs	13.5 hrs
500 W	49 mins	2 hrs	3 hrs	4 hrs	5 hrs
1000 W	15 mins	49 mins	1.5 hrs	2 hrs	2.5 hrs
1500 W	8 mins	27 mins	49 mins	1 hr	1.5 hrs
2000 W	Not recommended	15 mins	34 mins	49 mins	1 hr
2600 W	Not recommended	11 mins	25 mins	37 mins	49 mins